Ross Synergy MD, Инструкция по эксплуатации, Страница: 318 / 388

11–16 • Additional Installation Setups Synergy Q/MD Engineering Manual (v9.1 MD)
Aux Bus — Remote Panel Setup Menu
The Main Area is divided into three columns:
• The left-hand column lists the eight available GPI groups. These groups are
assigned during programming mode.
• The middle column lists the status of each GPI port, using two types of GPI icons.
~ If a GPI icon is lit, the associated GPI port is
On
(shorted to ground) and the
associated CCU Joystick button is being held down (for normally open
contacts).
~ If a GPI icon is dark, the associated port is
Off
(open).
• The right-hand column indicates the software version for each panel.
4. Press the Inquire GPIs softkey to poll the remote panels for the status of all connected
GPIs.
This completes the procedure for reviewing the status of your Remote Aux Panels.
Important GPI icons are numbered from left to right, starting at GPI 8 and
counting down to GPI 1 . These correspond to the 8 available ports on
each Aux panel.