Ross Synergy MD, Инструкция по эксплуатации, Страница: 264 / 388

10–18 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
Programming Special Functions
The following sections describe how to program your custom controls with various other special
functions. Refer to the section “
Editing Custom Control Macros ” on page 10-42 for more
information on inserting events into existing custom control macros.
The following functions are covered in this section:
• Time Clock Functions
• Special Functions
• Pbus
Time Clock Functions
The Synergy Q/MD switcher allows you to program custom control buttons with Time Clock
functions.
Use the following procedure to program one or more custom control buttons with special Time Clock
functions.
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press
Start Recording
to display the Recording Menu .
4. Press
Insert Special
to display the Insert Special Menu 1-2 .
5. Press
Time Clock
to display the Insert Time Clock Menu . This menu allows you to
choose specific Time Clock control functions to assign to the button.
Insert Special — Insert Time Clock Menu
6. Select a Time Clock function to insert as follows:
Operating
Tip
As a recommendation, keep Time Clock functions grouped together on
your
physical custom control buttons.