Ross Synergy MD, Инструкция по эксплуатации, Страница: 289 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–43
~
Insert Events
— Select this function to insert an event before the currently
highlighted event. Refer to the section “ Inserting Events ” on page 10-44 for
more information on inserting events.
~
Delete Event
— Select this function to delete the currently highlighted event.
This cannot be undone.
~
Modify Event
— Select this function to modify the currently highlighted
event. The Modify Event function will take you to the Insert Special - Special
Menu that was used to create the event.
~
Run Single Event
— Select this function to run the currently highlighted
event. Only the selected custom control event will be played.
~
Run From Here
— Select this function to run the custom control, starting
from the currently highlighted position.
This completes the procedure for editing a custom control. Refer to the section “ Inserting Events ” on
page 10-44 for more information on inserting an event into a custom control.
Modifying Events
The Modify Event function allows you to modify certain events in an already existing custom control.
Only events such as Pause CC can be modified.
Use the following procedure to modify an event in a custom control:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press HOME B Custom Controls .
2. Select the Custom Control bank and button that you want to edit to as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the Button knob to select the custom control that you wish to edit.
3. Press Edit to display the Edit Custom Control Menu .
Edit Custom Control Menu
4. Use the Event knob to select the event you want to modify.
Note Only certain functions found on the Special Menu , such as Pause
CC , can be modified.
Note
Only buttons with an asterisk (*) or an “at” (
@
) next to them in the list
are already programmed and can be edited.