Ross Synergy MD, Инструкция по эксплуатации, Страница: 209 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Output Configuration • 8–5
•
Clean Feed
— Select this option to have the main Clean Feed output routed to the
selected Output BNC.
•
GlobalStore X
— Select this option to assign the output of the selected
Global-Store to the selected Output BNC, where “X” represents the Global-Store
channel you are selecting.
•
Aux Bus Outputs 1:1 through 6:8
— Select this option to assign the output of
an Aux Bus to the selected Output BNC. You can select between Bank1 , Aux1
through Bank6 , Aux8 .
5. Assign each Output BNC as desired.
6. Press
HOME
to display the Installation Change Screen .
7. Accept or cancel these changes as follows:
• Press
Confirm
to accept the changes.
• Press
Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure for setting your Output BNC types.
Note On a Synergy 1.5 or 2.5 Q/MD , the Clean Feed output can only
output Clean Feed 1. Clean feed between Keys is not supported. BNCs
B05 and B06 provide a dedicated Clean Feed for the bottom MLE.
Note If the MultiDSK option is installed, the Clean Feed output can still
only output Clean Feed 1 (clean feed before Keys). Clean feed
between keys is not supported. However, BNCs
B05 and B06 will
provide a dedicated Clean Feed for these Downstream Keyers.
Note If you are using Aux Buses to pass non-native video format signals
through the switcher, Output BNC C03 and C04 cannot be used.
Output BNCs C03 and C04 cannot pass video that is of a format
other than what the switcher is operating in.