Ross Synergy MD, Инструкция по эксплуатации, Страница: 347 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Completing Setup • 12–5
5. Select the category of registers that you want to store as follows:
• Press
All
to store all categories of registers.
• Press
Memories
to store only Memory Registers .
• Press
Custom Controls
to store Custom Controls Registers .
• Press
Personality
to store only Personality Registers .
• Press
VTR Clips
to store only VTR Clips Registers .
• Press
Installation
to store only Installation Registers .
• Press
3D Sequences
to store only Squeeze & Tease MD Sequences .
• Press
Bus Maps
to store only Bus Maps .
6. Name your Setup as follows:
• Press
MORE
to display the Disk Store Menu 2-2 .
• Press
Name Setup
to display the Setup Names Menu .
Setup Names Menu
• Use the bottom Setup Number to select the Setup you want to rename.
• Enter a New Name for the setup.
• Press
Accept New Name
to accept the new name.
This completes the procedure for saving your setups.
Note If a File Icon appears above a softkey label, the Setup contains a file of
that type. If you store a register that has been previously saved in the
current Setup, you will be asked if you wish to overwrite that register.
Note As the software upgrade process automatically returns the switcher to
default
values, it is recommended that you store all of your setups.
Note A standard PS/2 keyboard can be used to perform the same actions as
pressing or rotating the
System Control buttons and knobs.