Ross Synergy MD Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 388

Ross Synergy MD Скачать руководство пользователя страница 153

Synergy Q/MD Engineering Manual (v9.1 MD)

Software Upgrades and Options • 6–17

Changing the Synergy MD/X Web Interface Account

Accessing Synergy MD/X Web Interface requires a user account. The Synergy Q/MD software ships
with a default user account:

•

User Name:

user

•

Password:

password

For security reasons, you should change the user name and password as soon as possible. You may
also wish to periodically change the user account to maintain secure access to your switcher.

Use the following procedure to change the Synergy MD/X Web Interface account:

1. On your computer, open your Web Browser and, in the address bar, type in the IP

address of your switcher to display the

Splash screen

and the

Synergy MD/X Web

Interface Login

window.

2. In the

Name

field enter the Synergy MD/X Web Interface user name (

user

if the default

user account is still being used).

3. In the

Password

field enter the password (

password

if the default user account is still

being used).

4. Click

OK

to start Synergy MD/X Web Interface and display the

System Info Page

.

5. Click

Admin

to display the

Admin Page

. This page allows you to change the user

account.

Admin Page

6. If you wish to change the user name, click in the

New Username

field and then type the

new user name. If you wish to leave the user name the same, leave this field blank.

7. If you wish to change the password, click in the

New Password

field and then type the

new password. If you do not wish to change the password, leave this field blank.

8. If you are changing the password, click in the

Confirm Password

field and then re-type

the new password that you used in step 7.

Note

Only alphanumeric, - (dash), _ (underscore), and. (period) characters
are permitted for user names and passwords.

«
...
151
152
153
154
155
...
»

Содержание Synergy MD





































































































































































































































































































































































































Отзывы:

Нет отзывов