Ross Synergy MD, Инструкция по эксплуатации, Страница: 330 / 388

11–28 • Additional Installation Setups Synergy Q/MD Engineering Manual (v9.1 MD)
~
480i
— Select this option if the reference you have connected to the Video
Input Board is 480 interlaced in a 4:3 aspect ratio.
~
576i
— Select this option if the reference you have connected to the Video
Input Board is 576 interlaced in a 4:3 aspect ratio.
~
720p 59.94
— Select this option if the reference you have connected to the
Video Input Board is 720 progressive at a frequency of 59.94 Hz .
~
720p 50
— Select this option if the reference you have connected to the Video
Input Board is 720 progressive at a frequency of 50 Hz .
~
1080i 59.94
— Select this option if the reference you have connected to the
Video Input Board is 1080 interlaced at a frequency of 59.94 Hz .
~
1080i 50
— Select this option if the reference you have connected to the Video
Input Board is 1080 interlaced at a frequency of 50 Hz .
~
1080p 24
— Select this option if the reference you have connected to the
Video Input Board is 1080 progressive at a frequency of 24 Hz .
~
1080pSF 24
— Select this option if the reference you have connected to the
Video Input Board is 1080 progressive segmented frames at a frequency of
24 Hz .
~
1080pSF 23.98
— Select this option if the reference you have connected to
the Video Input Board is 1080 progressive segmented frames at a frequency of
23.98 Hz .
4. Select the video format for the switcher as follows:
• Use the
Video Format
knob to select the video format you want the switcher to
operate in. You can select between the following:
~
480i
— Select this option to have the switcher operate in a 480 interlaced
format in a 4:3 aspect ratio.
~
480i 16:9
— Select this option to have the switcher operate in a 480 interlaced
format in a 16:9 aspect ratio.
~
576i
— Select this option to have the switcher operate in a 576 interlaced
format in a 4:3 aspect ratio.
~
576i 16:9
— Select this option to have the switcher operate in a 576 interlaced
format in a 16:9 aspect ratio.
~
720p 59.94
— Select this option to have the switcher operate in a 720
progressive format at a frequency of 59.94 Hz .
Note Video formats incompatible with the selected reference video format
are grayed out and cannot be selected. Changing the reference video
format changes the available video formats.
Important If you are using a 720p input reference, you will not be able to operate
in any format other than 720p. Similarly if you are using a 1080pSF
reference, you will not be able to operate in any format other than
1080pSF. The
Progressive Scan format does not contain field
information for timing an Interlaced format.