Ross Synergy MD, Инструкция по эксплуатации, Страница: 280 / 388

10–34 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
Custom Control Pauses
Use the Custom Control Pauses feature to place “pauses” within a custom control sequence. With a
pause inserted, a sequence can have a duration rather than being executed instantaneously. With
multiple pauses placed in between macro events, controlled switching between sources becomes
possible. Pressing the custom control button again during the wait time will immediately resume the
macro.
Use the following procedure to place a pause within a custom control macro:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press
Start Recording
to display the Recording Menu .
4. Press
Insert Special
to display the Insert Special Menu 1-2 .
5. Press
Special
to display the Special Menu .
Insert Special — Special Menu
6. Assign a pause to the custom control as follows:
• Use the
Selection
knob to select
Pause CC
.
• Use the
Seconds
knob to set the duration of the pause in seconds.
• Use the Frames knob to set the duration of the pause in frames.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.
Note Similar to a Custom Control Hold, a Pause will display a message on
the Main Menu or the Custom Control Menu indicating that the custom
control is paused.