Ross Synergy MD, Инструкция по эксплуатации, Страница: 198 / 388

7–28 • BNC Configuration and Check Synergy Q/MD Engineering Manual (v9.1 MD)
Checking Keys
Once your inputs have been checked, you can now check each Auto-Key association that you have
made. This procedure allows you to verify that each alpha-fill combination is working properly, and
generating a proper linear Key.
Synergy 1
Use the following procedure to check your Keys:
1. Select a background source on the Background ( BKGD) Bus .
2. Press KEY1 in the Assign Group on the Aux/Key Bus .
3. Select your first Key source on the Aux/Key Bus . The following figure is a sample
selection.
Sample Key Selection
4. In the Key 1 Group :
• Press AUTO SELECT to select a linear Key type.
• Press CUT to take the Key on-air. The CUT button lights momentarily and the red
ON indicator lights to show that the selected Key is on-air.
Note In the figure above, the Key Bus sources do not match the BKGD and
PST bus sources. This is because this particular user has elected to use
the PRG/Key SHIFT , or Reverse Shift , function, thus making the
Key Bus shifted all the time . Refer to the section, “ Setting Up Panel
Buttons ” earlier in this chapter for instructions.
BLACK
BKGD
AUX
KEY
PST
CAM
1
CAM
2
CAM
3
CAM
4
KEY1
KEY2
AUX
1
AUX
2
BLACK
CG
1
CG
2
DVE
1
DVE
2
BLACK
CAM
1
CAM
2
CAM
3
CAM
4
ASSIGN