Ross Synergy MD, Инструкция по эксплуатации, Страница: 5 / 388

26) To reduce the risk of fire, replacement fuses must be the same type and rating.
27) The safe operation of this equipment requires that the user heed and adhere to all installation and
servicing instruction contained within the equipment’s Engineering Manuals.
EMC Notices
United States of America
FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CANADA
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appariel numerique de la classe “A” est conforme a la norme NMB-003 du Canada.
EUROPE
This equipment is in compliance with the essential requirements and other relevant provisions of CE
Directive 93/68/EEC .
INTERNATIONAL
This equipment has been tested to CISPR 22:1997 along with amendments A1:2000 and A2:2002 ,
and found to comply with the limits for a Class A Digital device.
General Handling Guidelines
• Careful handling, using proper ESD precautions, must be observed.
• Power down the system before PCB removal.
Notice
Changes or modifications to this equipment not expressly approved by
Ross Video Limited could void the user’s authority to operate this
equipment.
Notice
This is a Class A product. In domestic environments, this product may
cause radio interference, in which case the user may have to take
adequate measures.