Ross Synergy MD, Инструкция по эксплуатации, Страница: 222 / 388

8–18 • Output Configuration Synergy Q/MD Engineering Manual (v9.1 MD)
Use the following procedure to select the MLEs that you want to fade to black:
1. Navigate to the Output Menu 1-2 as follows:
• Press
HOME B MORE B Setup B Installation B Output
.
2. Press
Fade To Black
to display the Fade To Black Menu .
Fade To Black Menu
3. Toggle the desired MLEs On or Off , as required.
This completes the procedure for selecting the MLEs that you want to fate to black.
MLE Tally Setup
The MLE Tally feature allows you to force a selected MLE to always function as if it is on air,
regardless of whether or not it is re-entered on the Program/Preset Bus . For instance, you may wish
to send the output of MLE 1 to an external device, such as a VTR, while the Program/Preset bus is on
air. In this configuration, you may want both MLE 1 and the Program/Preset Bus to be tallied. To
achieve this, the
MLE Tally feature must be used.
Use the following procedure to select the desired tally function for an MLE:
1. Navigate to the Output Menu 1-2 as follows:
• Press HOME
B
MORE
B
Setup
B
Installation
B
Output .
2. Press MLE Tally to display the MLE Tally Menu .
MLE Tally Menu
3. Use the MLE knob to select the MLE for which you want to assign a tally function.
4. Use the Tally knob to select the desired tally function:
• Always — Select this option to tally the selected MLE regardless of what is
selected on the Program/Preset Bus . The red ON LED will always be lit, and all
sources selected on the MLE will tally accordingly. Use this selection for
dual-aspect ratio configurations, as discussed above.
• On Air — Select this option when you want an MLE to be tallied only when it is
selected on the Program/Preset Bus .