Ross Synergy MD, Инструкция по эксплуатации, Страница: 288 / 388

10–42 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
Editing Custom Control Macros
After your custom control buttons have been programmed, you may wish to review and edit the
contents. Events can easily be inserted or deleted through the
Custom Controls Menu .
Use the following procedure to edit a custom control button:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press HOME B Custom Controls .
2. Select the Custom Control bank and button that you want to edit as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the Button knob to select the custom control that you wish to edit.
3. Press Edit to display the Edit Custom Control Menu .
Edit Custom Control Menu
The main area displays the location of the custom control that you are editing ( Bank 1
Button 1 [Custom01] ), and the contents of the custom control, including the number
of events, the duration of the macro, and details of the event highlighted in the scroll
area.
• The Scroll Area provides a list of the events currently programmed into the custom
control button.
• The Label Area provides softkeys for inserting, deleting, and running the events, as
required. The can select between the following:
~
Go To Start — Select this function to go to the start of the macro.
Note
Buttons with an asterisk (*) or an “at” (
@
) next to them in the list are
already programmed and can be edited.
Note
If your macro includes pauses or holds, a timeline will be displayed
showing these events.
Note
If the custom control has been programmed to recall a memory, as in
the example above, the memory name is displayed in the main area. If
memories from more than one MLE are being recalled, the name from
the highest MLE is displayed.