Ross Synergy MD, Инструкция по эксплуатации, Страница: 276 / 388

10–30 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
5. Press
Special
to display the Special Menu .
Insert Special — Special Menu
6. Assign a safe title to be recalled as follows:
• Use the
Selection
knob to select
Safe Title
.
• Use the
Safe ID
knob to select the stored Safe Title set up that you want to recall
when you run the custom control.
7. Press
Insert
to enter the safe title into your custom control macro.
8. Press
UP ONE
to return to the Custom Controls Recording Menu .
Custom Controls — Recording Menu
9. Press
Finish Recording
to finish recording to the selected custom control. The custom
control button will stop flashing.
This completes the procedure for recalling a safe title setting with a custom control button.
Custom Control Loops
The Loop Custom Control command allows you to have a custom control run continuously until you
stop it, or a Stop Custom Control command is executed from another custom control.
Use the following procedure to insert a Loop Custom Control command into a custom control:
1. Navigate to the Custom Controls Menus as follows:
• Press HOME
B
Custom Controls .
2. Select the custom control button you want to record to.
3. Press
Start Recording B Insert Special B Special
.
4. Insert a Loop command into the custom control as follows:
• Use the
Function
knob to select
Loop CC
.