Ross Synergy MD, Инструкция по эксплуатации, Страница: 226 / 388

8–22 • Output Configuration Synergy Q/MD Engineering Manual (v9.1 MD)
Switch on Field Setup
The Switch On feature allows you to select when the Synergy Q/MD switcher triggers a transition
from one video source to the next when you are running in an interlaced video format. Each interlaced
video frame is composed of an
Odd Field and an Even Field .
• Selecting Field 1 (
F1
) on the Output Menu enables the switcher to trigger the second
video source after the Odd Field of the first source is drawn.
• Selecting Field 2 (
F2
) on the Output Menu enables the switcher to trigger the second
video source after the Even Field of the first source is drawn.
Use the following procedure to set up the Switch On feature:
1. Navigate to the Output Menu 2-2 as follows:
• Press
HOME B MORE B Setup B Installation B Output B MORE
.
Output Menu 2-2 — Switch on Field Setup
2. Toggle the Switch on softkey to select F1 or F2 .
• F1 — Select F1 ( Odd Field / Field 1 ) to trigger the transition to the next video
source after the Odd Field of the first source. This is the default setting.
•
F2
— Select F2 ( Even Field / Field 2 ) to trigger the transition to the next video
source after the Even Field of the first source.
This completes the procedure to set up the Switch On feature.
Important This section does not apply if you are running in a progressive scan
video format.