Ross Synergy MD, Инструкция по эксплуатации, Страница: 275 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–29
• Use the
Function
knob to select
Run Sequence
.
• Use the
MLE
knob to select the MLE that you want to have the sequence run on.
• Use the
Key
knob to select the Keyer that you want to have the sequence run on.
7. Press
Insert
to insert the selected command into the custom control and display the
Insert Special Menu 1-2 .
8. Insert additional commands if needed. When you have finished inserting commands,
proceed to the next step to complete the procedure.
9. Press
UP ONE
to display the Recording Menu .
Custom Controls — Recording Menu
10. Press
Finish Recording
to finish recording to the selected custom control. The custom
control button will stop flashing.
This completes the procedure for inserting a run sequence custom control.
Safe Title
Use the Safe Title feature to program a custom control button to recall a specific user-configured safe
title setting. Refer to Chapter 10, “ Peripheral Control and More ” in the Synergy Q/MD/X
Operator’s Manual for more information on setting up the safe title.
Use the following procedure to recall a safe title setting with a custom control button:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the Bank knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press
Start Recording
to display the Recording Menu .
4. Press
Insert Special
to display the Insert Special Menu 1-2 .
Note The safe title function will only recall a stores Safe Title setting and
will not turn the safe title on or off.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.