Ross Synergy MD, Инструкция по эксплуатации, Страница: 266 / 388

10–20 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
Special Functions
Custom control buttons can be programmed to perform a variety of special functions for operational
convenience and efficiency. These functions include the following:
• Reset GPI
• Trigger GPI
• Automation
• Go To Menu
• Transition Keys and Cut Keys
• Run Sequence
• Safe Title
• Custom Control Loops
• Stop Other Custom Controls
• Custom Control Holds
• Custom Control Pauses
For device specific custom controls, such as for robotic cameras, or audio mixer, refer to the
applicable device chapter in the
Synergy Q/MD or Q/MD-X Engineering Manual, Volume II .
Reset GPI
Use the following procedure to program a GPI reset:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press Start Recording to display the Recording Menu .
4. Press Insert Special to display the Insert Special Menu 1-2 .
5. Press Special to display the Special Menu .
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.