Ross Synergy MD, Инструкция по эксплуатации, Страница: 193 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) BNC Configuration and Check • 7–23
2. Use the
Copy From
knob to select the bus map location you want to copy from.
3. Use the
Copy To
knob to select the bus map location you want to copy to. Any bus map
information in this location will be lost.
4. Press
Copy Map
on the Copy Bus Maps Menu to copy the bus map information from
the one location to the other.
This completes the procedure for copying a bus map.
Defaulting a Bus Map
You can reset a single bus map or all 16 user-configurable bus maps to their default settings if you
wish to quickly remove any changes you have made.
Use the following procedure to return one or all bus maps to the default layout:
1. Navigate to the Edit Bus Maps Menu as follows:
• Press HOME B MORE B Setup B MORE B Edit Bus Maps .
Edit Bus Maps Menu 1-2
2. Default a Single Bus Map as follows:
• Use the
Map
knob to select the bus map you want to default.
• Press Default Map to default the selected map. A confirmation screen is displayed
asking you to confirm the defaulting procedure.
• Accept or reject the changes you have made as follows:
~
Press
Confirm
to accept the changes.
~ Press
Cancel
to exit the menus safely, without making any changes. The
system returns to the previously stored settings.
3. Default All Bus Maps as follows:
• Press
MORE
to display the Edit Bus Maps Menu 2-2 .
• Press Default All Mappings . A confirmation screen is displayed asking you to
confirm the defaulting procedure.
• Accept or reject the changes you have made as follows:
~
Press
Confirm
to accept the changes.
~ Press
Cancel
to exit the menus safely, without making any changes. The
system returns to the previously stored settings.
4. Press
HOME
to display the Installation Change Confirmation Screen .
5. Accept or reject the changes you have made as follows:
• Press
Confirm
to accept the changes.