Ross Synergy MD, Инструкция по эксплуатации, Страница: 196 / 388

7–26 • BNC Configuration and Check Synergy Q/MD Engineering Manual (v9.1 MD)
•
Entire Switcher
— Select this option to assign a new Bus Map to all buses on the
switcher.
•
All MLE Buses
— Select this option to assign a new Bus Map to only the MLE
buses of the switcher. MLE buses include the Program/Background, Preset, Key 1,
Key 2 and Utility buses.
•
All Aux Buses
— Select this option to assign a new Bus Map to all of the Aux
buses.
4. Use the
Map
knob to select the bus map you want to assign to the selected buses.
5. Press
Perform Assign
. The selected bus map is assigned to the selected buses.
This completes the procedure for assigning a bus map to multiple buses simultaneously.
Note If all buses on your switcher are not assigned to the same bus map, the
Map knob will be initially set to Different .