Ross Synergy MD, Инструкция по эксплуатации, Страница: 36 / 388

1–18 • Introduction Synergy Q/MD Engineering Manual (v9.1 MD)
Multiple Serial Port Expander (BSS4) units can be connected to a Synergy Q/MD control panel at the
same time.
The unit is about 4 inches by 6 inches and is designed to easily mount under the console near the
Synergy Q/MD control panel.
Network Still & Clip Server Option
This option adds a fully integrated Still and Clip Server to the system.
The following features are included:
• 48 or 100 hours of clip storage (dependent upon the option purchased) at 12Mb/s in
MPEG-2 compression
• Virtually unlimited still storage, incorporating both key and fill
• Video animation playout with synchronized key and fill
• Animated logo playout with synchronized key and fill
• 2 dedicated playout channels
• 1 record/play channel for live capture and/or additional playout
• Ethernet connectivity allowing drag and drop of stills and clips over a network
• Included Synergy Video Server Control Interface
Video Server Control is included with this option and does not need to be purchased separately. Any
number of control panel ports are now activated to control this and any other video server that can be
controlled using VDCP (Harris/Louth) Protocol.
Unlike other systems on the market, this solution allows synchronized key and fill playout of clips,
animations, and stills, and enables the user to drop in graphics and animations over a network using
simple MPEG or Targa files.
AuxKeys, System Wide
This revolutionary option turns Aux Buses into A/B mixers or mixer/keyers.
The use of a single AuxKey can free up an entire MLE in many applications. This is a highly
recommended option. Key and mix sources are fed from adjacent Aux Buses that have access to every
signal in the switcher. Of particular interest in this application are Global-Store outputs that, with
MediaCache enabled, can provide animated logo capability.
AuxKeys can be used two ways:
• Mixer (mix between two inputs on an Aux Bus)
• Mixer/Keyer (mix and Key)
Switcher outputs are assigned to AuxKeys in groups of four. Mix or Key operations can be previewed
and clean feed is also available — this acts very much like a standard MLE.
Note The Network Still & Clip Server Option is only available in Standard
Definition.
Note If MultiDSK is purchased and activated, the maximum possible
number of AuxKeys is reduced.