Ross Synergy MD, Инструкция по эксплуатации, Страница: 321 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Additional Installation Setups • 11–19
Programming Standard GPI Inputs
Use the following procedure to set up your standard GPI ports:
1. Navigate to the GPI I/O Input Setup Menu as follows:
• Press HOME B MORE B Setup B Installation B GPI I/O B Inputs .
GPI Input Setup Menu
This menu allows you to associate each GPI Input with an area and button on the
switcher that you would like to trigger, when that specific GPI input pulse is received
from an external device.
• The Main Area provides a mini “help” message.
• The Label Area provides access to additional GPI I/O setup menus.
• The Scroll Area provides three functions that are controlled by their respective
Scroll Knobs :
~ The GPI Input knob selects the GPI Input port ( 1 to 10 ) to which you want to
assign a switcher event type and location (area).
~ The Function knob selects between Off , Auto , Cut , Cust Ctrl , and Mem
Recall . Specific functions are listed below.
Standard GPI Output Worksheet
Standard GPI Output
#
Output Name Trigger Type Trigger Level
Sample GPI Output #1 PrevStill Edge Low
Sample GPI Output #2 Roll VTR Level High
1
2
3
4
5
6
7
8
9
10