Ross Synergy MD, Инструкция по эксплуатации, Страница: 74 / 388

3–10 • Physical Installation Synergy Q/MD Engineering Manual (v9.1 MD)
Installation at a Glance
The following section presents a brief overview of the installation process. The exact steps taken in
installing your switcher will depend on the specific options that you have purchased.
Experienced installers may wish to work from this outline as required.
• Install the control panel.
• Install the electronics frame in an equipment rack.
• Install the frame power supplies.
• Perform the basic cabling:
~ control panel to frame interconnection
~ keyboard to control panel cabling
~ remote Aux panel cabling
~ reference input(s)
~ switcher interconnections
~ connections to preview and program monitors
• Power up and do a quick video check on the switcher.
• Decide on inputs and install push-button inserts accordingly.
• Connect inputs.
• Connect output monitors as required for your installation.
• Make connections to external equipment. The ways of connecting such sources will
depend on personal preference as well as on the combination of options purchased with
the switcher.
• Connect character generator key (alpha) and video input signals.
• Connect the tallies.
• Connect and set up the general purpose interface, configuring the editor GPIs and the
Aux Bus GPI inputs and outputs.
• Configure the switcher personality according to your installation requirements and
personal preferences. The many operational parameters include editor related functions,
auto keying selections, Aux Bus and memory configuration, and various button
assignments and operational shortcuts.
Note
All cautionary rules regarding static discharge apply. Refer to the
section “
A Word About Static Discharge ” at the beginning of this
manual for details.
Note
The previous steps cover switcher installation and configuration.
Additional appendices at the end of this manual provide information
on installing hardware options.