Ross Synergy MD, Инструкция по эксплуатации, Страница: 287 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–41
~
Standard
— Select this option to use the default mnemonic format as set from
the Personality Menu .
~
Green
— Select this option to set the mnemonic background to green.
~
Yellow
— Select this option to set the mnemonic background to yellow.
~
Orange
— Select this option to set the mnemonic background to orange.
~
None
— Select this option to turn the mnemonic background off and not have
it illuminated.
3. Select how the name will appear in the mnemonic display as follows:
• Press
Next Start Pos
to adjust the point in the name where the text on the
mnemonic display starts. For example, if you have the name
Custom01
, you can
press the
Next Start Pos
button until the cursor is over the
0
to have only
01
appear on the mnemonic display.
• Press
Prev Start Pos
to move the cursor in the opposite direction as the
Next
Start Pos
.
4. Press
Accept New Name
to save the display style in memory.
• Press
Yes
to abandon changes and move to the new custom control number. The
name reverts to its previous name as stored in memory.
• Press
No
to retain changes without moving to the new custom control number.
This completes the procedure for naming and customizing the look of your custom controls.
Note If you exit the installation menus without first pressing Accept New
Name , the following screen is displayed.
This entry “ --- ” has been changed to “ --- ”. Abandon the
changes?