Ross Synergy MD Скачать руководство пользователя страница 286

Страница: 286 / 388

10–40 • Custom Controls

Synergy Q/MD Engineering Manual (v9.1 MD)

Customizing Mnemonic Displays — Buttons

If the

Mnemonic Display option

is purchased and installed, use the following procedure to customize

the display appearance:

1. Navigate to the

Custom Control Name Menu 2-2

as follows:

•

Press

HOME

Custom Controls

Modify Name

MORE

Custom Control Name Menu 2-2

2. Adjust the appearance of the Mnemonic Display name for the custom control as follows:

•

Use the

Font

knob to select the size of the font. You can select from the following:

Standard

— Select this option to use the default mnemonic format as set from

the

Personality Menu

Small

— Select this option to use a small font that permits up to 6 characters

per line.

Small Invert

— Select this option to use a small font that permits up to 6

characters per line, and draws light text on a dark background.

Medium

— Select this option to use a medium font that permits up to 4

characters per line.

Medium Invert

— Select this option to use a medium font that permits up to 4

characters per line, and draws light text on a dark background.

Large

— Select this option to use a large font that permits only 2 characters

per line.

Large Invert

— Select this option to use a large font that permits only 2

characters per line, and draws light text on a dark background.

NONE

— Select this option to use no font in the mnemonic display. The

display will only show the selected background color, with no text.

•

Use the

Color

knob to select the color of the display. You can select from the

following:

Note

The

Synergy 1

control panel does not support the

Mnemonic Display

option and does not have the

Custom Controls Name Menu (2-2)

Содержание Synergy MD





































































































































































































































































































































































































Результаты поиска

Содержание Synergy MD

Отзывы:

Ross Synergy MD, Инструкция по эксплуатации, Страница: 286 / 388

Результаты поиска

Содержание Synergy MD

Отзывы: