Ross Synergy MD, Инструкция по эксплуатации, Страница: 348 / 388

12–6 • Completing Setup Synergy Q/MD Engineering Manual (v9.1 MD)
Recalling Configurations
As required, you can recall all categories of configuration registers, or you can simply recall the
desired individual category.
Use the following procedure to recall your setup configurations:
1. Navigate to the Disk Menu as follows:
• Press HOME B Disk .
2. Press Dest/Source to display the Dest/Source Menu.
Dest/Source Menu
3. Select the storage device that you want to use to recall the files from as follows:
• Use the top knob to select the storage device you want to recall the files from. You
can select between the following:
~
Hard Drive — This option will allow you to recall the files from the internal
hard drive.
~ USB — This option allows you to name the files on a USB key plugged into
the control panel USB port.
• If you are saving to the internal hard drive, use the Set Names knob to select the
Setup you want to name. There are 100 ( 00 through 99 ) setups available from
which to recall files.
4. Press Recall to display the Disk Recall Menu 1-2 .
Disk Recall Menu 1-2
Note
Ensure that any custom setups are stored to another Setup before you
recall a setup. When a register is recalled, the existing register
information is replaced with the recalled.