Ross Synergy MD, Инструкция по эксплуатации, Страница: 132 / 388

5–6 • Using the Menu System Synergy Q/MD Engineering Manual (v9.1 MD)
Positioner Icons
When you select specific installation and operational menus, Positioner Icons appear in the
right-hand Scroll Area . Typically, two or three icons are shown, depending upon the selected menu
and function.
When these icons appear, you can adjust the selected function or parameter either with the Scroll
Knobs or with the Positioner . In addition, when the Positioner Icons appear, the
MENU
button
automatically lights in the Positioner Group — indicating that Positioner control is temporarily
assigned to the display, rather than to a selected MLE and positionable function.
A sample menu that includes the three icons is shown below.
Border Menu — with Positioner Icons
A) When the left-right Positioner Icon appears, you can use the top
Knob
to adjust
the selected function, or you can move the Positioner left and right .
B) When the up-down Positioner Icon appears, you can use the middle
Knob
to
adjust the selected function, or you can move the Positioner up and down .
C) When the circular Positioner Icon appears, you can use the bottom
Knob
to adjust
the selected function, or you can twist the Positioner knob clockwise and
counter-clockwise .
When you turn the
MENU
button off, the Positioner once again is assigned to the current panel
function and location.
Refer to the “ Positioner Group ” section in Chapter 8 of the Synergy Q/MD/X Operator’s Manual
for additional information on the Positioner itself, and the three Positioner Icons .