Ross Synergy MD, Инструкция по эксплуатации, Страница: 272 / 388

10–26 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
9. Press
UP ONE
to display the Recording Menu .
Custom Controls — Recording Menu
10. Press
Finish Recording
to finish recording to the selected custom control. The custom
control button will stop flashing.
This completes the procedure for creating a Squeeze & Tease MD Go To Menu custom control
macro.
Transition Keys and Cut Keys
Use the Trans Keys or Cut Keys feature to perform key transitions or cuts with a custom control.
Use the following procedure to perform key transitions with a custom control:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the Button knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press
Start Recording
to display the Recording Menu .
4. Press
Insert Special
to display the Insert Special Menu 1-2 .
5. Press
Special
to display the Special Menu .
Note The Trans Keys and Cut Keys functions cannot initiate a transition
if a transition is already in progress on the associated MLE .
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.