Ross Synergy MD, Инструкция по эксплуатации, Страница: 253 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–7
the two upper scroll knobs. The Current Name , Mnemonic , and New Name fields
are located below the array.
In the New Name field, the “active” character — the one that you are changing —
is indicated by the black highlighting of the letter.
• The Label Area provides an array of tools for naming and editing your physical
names.
• The Scroll Area provides three functions that are controlled by their respective
knobs:
~
The
Horizontal
knob moves the highlight horizontally.
~ The
Vertical
knob moves the highlight vertically.
~ The
Bank number
knob selects the bank that you want to name. As you scroll
through your banks the Current Name field tracks each name.
3. To name a bank, rotate the
Bank number
knob until the desired bank number is shown
— the one that you want to name. Please note:
• As you rotate the knob, the Current Name Field changes to show the current name
(as stored in switcher memory).
• The factory default format for all bank names is:
[
Bank
][
space
][
number
]
For example,
Bank 1
or
Bank12
. This format makes it easy to associate names with
actual banks.
4. To name your bank, use the
Horizontal
and
Vertical
knobs to select the desired
character. The highlighted position in the New Name Field changes as you select each
character. A maximum of 8 characters may be entered.
• Press
Space
to add a space at the highlighted position. If a letter is in the active
position, it will be deleted.
• Press Prev Letter to move the highlight one space to the left.
• Press
Next Letter
to move the highlight one space to the right.
5. When the name entered is correct, press
Accept New Name
.
If you exit the installation menus without first pressing
Accept New Name
, you are
asked if you wish to abandon any changes you have made to the name. Choose from the
following:
• Press
Yes
to abandon changes and move to the new bank number. The name reverts
to its previous name as stored in memory.
• Press No to retain changes without moving to the new bank number.
Note If the Mnemonic Display option is purchased and installed, the
Mnemonic field displays the bank name as it will appear in the
associated mnemonic display. Additional mnemonic display
configurations are discussed in the section “
Customizing Mnemonic
Displays — Banks ” on page 10-8.
Operating
Tip
As you rotate the Horizontal and Vertical knobs, the buttons on
MLE 1 of the control panel light and correspond to each character (in
sequence). If desired, you can press the MLE button to select a
character.