Ross Synergy MD, Инструкция по эксплуатации, Страница: 278 / 388

10–32 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press
HOME B Custom Controls
.
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
3. Press
Start Recording
to display the Recording Menu .
4. Press
Insert Special
to display the Insert Special Menu 1-2 .
5. Press
Special
to display the Special Menu .
Insert Special — Special Menu
6. Assign a Custom Control Hold as follows:
• Use the
Selection
knob to select
Hold CC
.
• Use the Popup knob to select the type of popup notification you want to appear
when the hold is performed. You can select between the following:
~
No Popup
— Select this option to have only a message displayed on the Main
Menu or the Custom Control Menu when a custom control hold is being
performed.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.
Note When a macro is held, the name of the macro appears in the Main
Menu and Custom Controls Menu . The Hold CC also extends the
time that the associated custom control button will remain lit until the
macro is continued or cancelled.