Ross Synergy MD, Инструкция по эксплуатации, Страница: 195 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) BNC Configuration and Check • 7–25
•
MLEx Utility
— Select this option to assign the mapping to the Utility bus of the
indicated MLE.
•
MultiDSK 3
— Select this option to assign the mapping to the MultiDSK bus of
your switcher.
•
MultiDSK 4
— Select this option to assign the mapping to the MultiDSK bus of
your switcher.
•
Bnk x Aux x ( x : x )
— Select this option to assign the mapping to the specified Aux
bus of your switcher.
•
RmtAuxPnl A X
— Select this option to assign a bus map to the Remote Aux
Panel(s) connected to the Aux Port X , where “ X ” is the number of the Aux Port.
•
RmtAuxPnl P X
— Select this option to assign a bus map to the Remote Aux
Panel(s) connected to the Peripheral Port X , where “ X ” is the number of the
Peripheral Port.
5. Use the
Map
knob to select the Bus Map you want to assign to a bus. You can select the
default mapping or any of the 16 user-configurable mappings.
6. Press
Perform Assign
to assign the selected map to the bus.
This completes the procedure for assigning a bus map to a bus.
Assigning a Bus Map to Multiple Buses
If you need to assign a bus map to all buses on your switcher, all MLE buses, or all Aux Buses, you do
not have to do so on an individual basis.
Use the following procedure to assign a bus map to multiple buses simultaneously:
1. Navigate to the Personality Menu 3-3 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
2. Press Assign Bus Maps to display the Assign All Bus Maps Menu .
Assign Bus Maps Menu
3. Select which buses you want to assign a bus map to as follows:
Note If you are assigning a map to a MultiDSK Keyer , only the first button
mapping from the Bus Map will be applied to the Source button in
the Downstream Keyer Group .
Important
The OverDrive Production Control System requires that all buses on
your switcher are assigned the same bus map. OverDrive does not
support different bus maps on different buses.