Ross Synergy MD, Инструкция по эксплуатации, Страница: 213 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Output Configuration • 8–9
Bank 5 Assign 8
In the Aux Bus Output Menu , press the Bank 5 softkey then ASSIGN 8 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 1
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 1 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 2
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 2 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 3
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 3 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 4
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 4 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 5
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 5 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 6
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 6 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 7
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 7 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Bank 6 Assign 8
In the Aux Bus Output Menu , press the Bank 6 softkey then ASSIGN 8 in
the AUX BUS ASSIGN group, then switch been inputs on the AUX Bus.
Special Output Verification
To Verify This Output Do This ...
CLEAN
(All Switchers) Output depends on clean feed point of origin. Refer to the
section “
Clean Feed Setup ” on page 8-17 for more information.
PV
(All Switchers) Place different sources on each individual MLE bus. In the
PREVIEW BUS group, switch between PGM and PV buttons on each MLE.
OVL
(All Switchers, Preview Overlay Option must be installed.) In the
PREVIEW OVERLAY group, switch between the various overlay options.
In the PREVIEW BUS group, switch between PGM and PV buttons on each
MLE and verify that the overlay output tracks.
Auxiliary Output Verification
To Verify This Output Do This ... (all switchers)