Gima 35306, Руководство пользователя

Страница: 96 / 693

96
ENGLISH
13.3.2 Mainstream CO
2
Sensor Connection
Demonstration for Mainstream CO
2
Sensor Connection
1. Take out the CO
2
Sensor and insert the CO
2
Sensor Cable into the connector labeled “CO
2
” on the connector panel of
the monitor;
2. Snap the CO
2
sensor onto the airway adapter. A “click” will be heard when the airway adapter is properly inserted.
3. Position the airway adapter in the patient’s respiratory circuit (as close to the patient as possible) between the
endotracheal tube and the ventilator circuit. Next, turn on the CO
2
switch at CO
2
Setup Screen and then wait 2 minutes
for the sensor warm-up.
☞
Always position the sensor with the adapter in an upright position to avoid collection of fluids on the windows of the
adapter. Large concentrations of fluids at this point will obstruct gas analysis.
Demonstration for Mainstream CO
2
Sensor Connection
1. Take out the CO
2
Sensor and insert the CO
2
Sensor Cable into the connector labeled “CO
2
” on the connector panel of
the monitor;
2. Snap the CO
2
sensor onto the airway adapter. A “click” will be heard when the airway adapter is properly inserted.
3. Position the airway adapter in the patient’s respiratory circuit (as close to the patient as possible) between the
endotracheal tube and the ventilator circuit. Next, turn on the CO
2
switch at CO
2
Setup Screen and then wait 2 minutes
Sensor cable
Adapter
CO
2
sensor