Gima 35306, Руководство пользователя

Страница: 44 / 693

44
ENGLISH
3.9.4 Privacy Mode
Private mode can be used when the patient information should be protected from visitors and other non-clinical
personnel. In privacy mode, the monitor
does not display patient information and monitoring data. Only the word
“Privacy” displays on the screen. In the private mode, the monitor still monitors the patient, but the monitoring data is
only displayed on the central monitoring system.
The monitor has the following features after entering Private Mode:

No parameters and waveforms are displayed. The screen turns blank.

All system sounds, including alarm audio, pulse tone are muted.

The alarm lamp and technical alarm status indicator still can light up for the alarms.

Monitoring data and alarms are presented only at the central monitoring system.
To enter privacy mode, select “Menu”
→
”System Settings”
→
“General”
→
“Mode”
→
“Privacy Mode”.
To exit privacy mode, press any key except , or touch any area on the touchscreen.
☞
You cannot enter the private mode if a low battery alarm occurs.
☞
Private mode is only available when the monitor is connected with the central monitrong system (CMS) and the
patient is admitted by the CMS.
3.9.5 Standby Mode
Select “Menu”
→
“Standby”.
In Standby Mode, you can temporarily stop monitoring without turning off the monitor. Click any key can exit from it. If
your monitor is configured with touchscreen function, then touch any point of the screen can exit from Standby Mode.