Woodward easYgen-3000XT Series, Manual, Page: 552 / 1205

ID Parameter CL Setting range
[Default]
Description
the appropriate buttons or by
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
4203 Enabled 2 [Always] Monitoring for this fault condition
is continuously enabled.
87.70 LM:Eng.mon Monitoring for fault conditions is
not performed until engine
monitoring is enabled. This is
determined through the
LogicsManager equation "Release
engine monitoring".
For xx = 1 to 32:
96.{xx}
LM: Flag{xx}
The monitoring is executed, if the
LogicsManager "Flag {xx}" is
TRUE.
Example:
96.01 LM: Flag 1, 96.02 LM: Flag
2, ..., 96.32 LM: Flag 32
4206 AM FlexLim 1 source 2 Determined by AnalogManager
82.01
[A1 = 10.01 ZERO]
Any possible data sources may be
selected. Analog and digital OUT
value/signal are available as
sources for AnalogManager and
LogicsManager.
Refer to ╚═▷ “9.4.2 Data Sources
AM” for a list of all data sources.
Parameter IDs
Flexible
limit # Descrip‐
tion Monitor‐
ing Monitor‐
ed
analog
value Monitor‐
ing at Limit Hyster‐
esis Delay Alarm
class Self
acknow‐
ledge Enabled
Fallback
1 4208 4200 4206 4204 4205 4216 4207 4201 4202 4203
2 4225 4217 4223 4221 4222 4233 4224 4218 4219 4220
3 4242 4234 4240 4238 4239 4250 4241 4235 4236 4237
4 4259 4251 4257 4255 4256 4267 4258 4252 4253 4254
5 7108 4270 4276 4274 4275 4278 4277 4271 4272 4273
6 7116 4280 4286 4284 4285 4288 4287 4281 4282 4283
7 7124 4290 4296 4294 4295 4298 4297 4291 4292 4293
8 7132 6000 6006 6004 6005 6008 6007 6001 6002 6003
9 7140 6010 6016 6014 6015 6018 6017 6011 6012 6013
10 7148 6020 6026 6024 6025 6028 6027 6021 6022 6023
11 7156 6030 6036 6034 6035 6038 6037 6031 6032 6033
12 7164 6040 6046 6044 6045 6048 6047 6041 6042 6043
13 7172 6050 6056 6054 6055 6058 6057 6051 6052 6053
14 7180 6060 6066 6064 6065 6068 6067 6061 6062 6062
552 easYgen-3000XT Series B37574
4 Configuration
4.5.5 Flexible Limits
Released