Woodward easYgen-3000XT Series, Manual, Page: 337 / 1205

ID Parameter CL Setting range
[Default]
Description
parameter has priority over
parameters
╚═▷ 12928 and ╚═▷
12927 ).
[(0 & 1) & 1] Notes
For information on the
LogicsManager and its default
settings see
╚═▷ “9.3.1
LogicsManager Overview” .
12928 Segment no.3 act. 2 Determined by LogicsManager
86.88 Once the conditions of the
LogicsManager have been fulfilled,
this genset is assigned load share
segment number 3 (this
parameter has priority over
parameters
╚═▷ 12927 ).
[(0 & 1) & 1] Notes
For information on the
LogicsManager and its default
settings see
╚═▷ “9.3.1
LogicsManager Overview” .
12927 Segment no.4 act. 2 Determined by LogicsManager
86.89 Once the conditions of the
LogicsManager have been fulfilled,
this genset is assigned load share
segment number 4.
[(0 & 1) & 1] Notes
For information on the
LogicsManager and its default
settings see
╚═▷ “9.3.1
LogicsManager Overview” .
5568 Mode ext. load share
gateway 2 The operation mode for the
external Woodward Load Share
Gateway (LSG) is configured here.
[0] Off
1 Woodward EGCP-2
RS-485 (P & Q)
2 Woodward SPM-D
R = 4.99k | P: 0 − 4 V (0 to 100%)
| Q: 0 − 5 V (-85% to +85%)
Woodward MFR 15
R = 4.99k | P: 0 − 4 V (0 to 100%)
3 Woodward 2301 A
R = 54.90k | P: 0 − 3 V (0 to
100%)
4 Caterpillar LSM
R = 25.00k | P: 0 − 3 V (0 to
100%)
5 Cummins PCC 3100, 3200, 3201,
3300
337 easYgen-3000XT Series B37574
4 Configuration
4.4.4.3.8 Load Share Control Grouping
Released