• The maximum length of the alpha numeric prefix (ID
) is 6
•
characters
The Random Number
Each time a password is entered, the random number is calculated at new. This
guarantees max. security.
Password handling on the HMI of the easYgen
The easYgen supports only the Basic Code entry.
The easYgen HMI password level shall be visible in the parameter menu screens.
A dynamic key symbol is visible and displays the currently entered code level number
inside:
• code level = 00: locked
•
• code level > 00: unlocked
•
In case of a password level time out during configuration over HMI, the HMI display
switches back to the main screen.
Password handling in ToolKit
The ToolKit supports the User Account entry and in case of CANopen connection the Basic
Code entry.
Ethernet Connection: The ToolKit password level is visible in the menu [STATUS MENU /
Diagnostic / Interfaces / Ethernet / Servlink]. Refer to your IP-address (PC).
USB Connection: The ToolKit password level is visible in the menu [STATUS MENU /
Diagnostic / Interfaces / USB].
CAN Connection: The ToolKit password level is visible in the menu [STATUS MENU /
Diagnostic / Interfaces / CAN / CAN 1 state - CAN 3 state].
Password handling via Modbus TCP using Ethernet connection
The easYgen must be a member of an Ethernet network and both user name and
password have to be transferred (from PLC) to the device.
186
easYgen-3000XT Series
B37574
4 Configuration
4.3.4 Enter Password
Released