HMI Text
Note
(LMs 12926, 12925 have priority.)
04.37 Remote volt. setp. 2
TRUE if "Request Voltage Setpoint 2" is set via interface (control word 504).
04.38 Remote freq. setp. 2
TRUE if "Request Frequency Setpoint 2" is set via interface (control word 504).
04.39 Remote PF setp. 2
TRUE if "Request Power Factor Setpoint 2" is set via interface (control word 504).
04.40 Remote pwr. setp. 2
TRUE if "Request Active Power Setpoint 2" is set via interface (control word 504).
04.41 Transition mode 1
TRUE if the result LM "12931 Transition mode
1" is true.
04.42 Transition mode 2
TRUE if the result LM "12932 Transition mode
2" is true.
(LM 12931 has priority.)
04.43 LD start stop
TRUE if LDSS is active (
Main conditions: the result LM "12930 Load dependent
start/stop" is true, "Operation mode" is automatic and engine shall run.
04.44 RemoteControl Bit 1
TRUE if remote control bit 1 is activated. (Control word 505)
04.45 RemoteControl Bit 2
TRUE if remote control bit 2 is activated. (Control word 505)
04.46 RemoteControl Bit 3
TRUE if remote control bit 3 is activated. (Control word 505)
04.47 RemoteControl Bit 4
TRUE if remote control bit 4 is activated. (Control word 505)
04.48 RemoteControl Bit 5
TRUE if remote control bit 5 is activated. (Control word 505)
04.49 RemoteControl Bit 6
TRUE if remote control bit 6 is activated. (Control word 505)
04.50 RemoteControl Bit 7
TRUE if remote control bit 7 is activated. (Control word 505)
04.51 RemoteControl Bit 8
TRUE if remote control bit 8 is activated. (Control word 505)
04.52 RemoteControl Bit 9
TRUE if remote control bit 9 is activated. (Control word 505)
04.53 RemoteControl Bit 10
TRUE if remote control bit 10 is activated. (Control word 505)
04.54 RemoteControl Bit 11
TRUE if remote control bit 11 is activated. (Control word 505)
04.55 RemoteControl Bit 12
TRUE if remote control bit 12 is activated. (Control word 505)
04.56 RemoteControl Bit 13
TRUE if remote control bit 13 is activated. (Control word 505)
04.57 RemoteControl Bit 14
TRUE if remote control bit 14 is activated. (Control word 505)
04.58 RemoteControl Bit 15
TRUE if remote control bit 15 is activated. (Control word 505)
04.59 RemoteControl Bit 16
TRUE if remote control bit 16 is activated. (Control word 505)
04.60 Crit. mode postrun
TRUE as long as the critical mode postrun time is running.
04.61 Lamp test
TRUE if lamp test is active.
04.62 Act.pwr.LS active
TRUE if load share of active power is active.
04.63 React.pwr.LS active
TRUE if load share of reactive power is active.
04.64 Key activation
TRUE as long as the "Key activation time" is running.
Only relevant for versions with front panel (HMI).
04.65 System update active
TRUE if System Update (teach in process) is active.
1091
easYgen-3000XT Series
B37574
9 Appendix
9.3.2.4 Group 04: Application conditions
Released