Woodward easYgen-3000XT Series, Manual, Page: 124 / 1205

Values »1«
The "values" section ( ╚═▷ Fig. 86 /1) of the screen illustrates all measured power related
information including voltages, currents, frequencies, power, and power factor values.
If the mains data display is disabled, the main screen will only show generator data with
bigger digits.
The section's content changes based on the selected sub-menu screen.
For information on specialized menu screens refer to ╚═▷ “4.1.5 Specialized Menu
Screens”
Status messages »2«
The "status message" section ( ╚═▷ Fig. 86 /2) of the screen shows the actual operating
information.
For a list of all operation states refer to ╚═▷ “9.5.1 Status messages” .
Alarm messages »3«
The "alarm message" section ( ╚═▷ Fig. 86 /3) of the screen shows the last alarm message
that is occurred and not yet acknowledged.
For a list of all alarm messages refer to ╚═▷ “9.5.5 Alarm Messages” .
Single line diagram »4«
The single line diagram ( ╚═▷ Fig. 86 /4) shows the current status of the engine and power
circuit breakers.
This section is also used for manual operation of the genset.
For additional information refer to ╚═▷ “5.2.2 Operating Mode MANUAL” .
Softkeys »5«
The softkeys ( ╚═▷ Fig. 86 /5) permit navigation between screens, levels and functions as
well as configuration and operation.
Group Softkey Caption Description
Display Display Mode Next step to display all measured (delta/wye) voltages one
after the other.
Customer configurable
screen 1 (and 2) Change to "customer specific screen 1 (or 2)"
Notes
124 easYgen-3000XT Series B37574
4 Configuration
4.1.1 Basic Navigation
Released