If the operating mode STOP is selected while the engine performs a cool down the
following applies:
• Pressing the STOP button again causes an immediate stop of the cool down and
•
stops the engine.
If the conditions of the LogicsManager function "Enable MCB" (parameter
) are
TRUE, the MCB will be closed again if it is open in STOP operating mode.
5.2.2
Operating Mode MANUAL
General usage
In the MANUAL operating mode (mode button »MAN« illuminated) both the engine circuit
breaker and the power circuit breaker can be operated via the push buttons along the
bottom of the display (softkeys). Additionally the Start(I)/Stop(O) buttons can be used to
start or stop the engine.
Fig. 210:
XT_MAN-buttons
1
Mode button: MAN
2
START button: Engine
3
STOP button: Engine
4, 6
Soft buttons: Breaker OPEN/CLOSE
5
Soft button not used
⚙
674
easYgen-3000XT Series
B37574
5 Operation
5.2.2 Operating Mode MANUAL
Released