Woodward easYgen-3000XT Series, Manual, Page: 64 / 1205

3.3.1 Terminal Allocation
NOTICE!
Avoid electrostatic discharge!
Before working with terminals please read and follow the instructions of chapter ╚═▷
“Electrostatic discharge” .
For CAN and RS485 shielded cabling, no more than 25 mm wiring exposed without shield
coverage are allowed at terminal plug side.
The device terminals are allocated (similarly for all housing variants) as follows:
• Plastic housing - for easYgen-3200XT-P1 and easYgen-3200XT-P1-LT •
• Sheet metal housing - for easYgen-3100XT-P1 •
The max. possible conductor cross-section of the terminals used is A
max
= 2.5
mm
2
!
LT Variant description
The temperature range is the only difference between standard plastic housing and LT
variant.
The manual is describing plastic housing and metal housing variant. Describing the
plastic housing means both standard and LT variant - if not, it is mentioned!
64 easYgen-3000XT Series B37574
3 Installation
3.3.1 Terminal Allocation
Released