Message text
ID
Meaning
Time dep. voltage 3
4980
Time-dependent voltage, limit value 3
The measured voltage falls below/exceeds the configured criteria.
9.5.5.6
Engine monitoring
Message text
ID
Meaning
Overspeed 1
2112
Engine overspeed, limit value 1
The engine speed has exceeded the limit value 1 for engine overspeed.
Overspeed 2
2113
Engine overspeed, limit value 2
The engine speed has exceeded the limit value 2 for engine overspeed.
Underspeed 1
2162
Engine underspeed, limit value 1
The engine speed has fallen below the limit value 1 for engine underspeed.
Underspeed 2
2163
Engine underspeed, limit value 2
The engine speed has fallen below the limit value 2 for engine underspeed.
Unintended stop
2652
Unintended Stop
The easYgen expects the generator to be running but a sudden underrun of the
ignition speed has been detected.
Speed/freq. mismatch
2457
Difference in frequency/speed measurement
The speed differential between the generator frequency (ascertained by the
generator voltage measurement) and the engine speed (measured by the MPU)
has exceeded the configured limit.
Eng. stop malfunct.
2504
Engine cannot be stopped
There is still recognized a turning engine (by electrical frequency or speed signal)
even the engine is stopped.
Start fail
3325
Failure of engine to start
The generator set has failed to start after the configured number of attempts.
Charge alt. low volt
4056
Charging alternator voltage low
The charging alternator voltage has fallen below the critical limit.
Cylinder temp.lev.1
14575
Cylinder temperature Level 1
The cylinder temperature difference exceeded level 1.
Cylinder temp.lev.2
14576
Cylinder temperature Level 2
The cylinder temperature difference exceeded level 2.
Cyl.tmp.wire brk.
14584
Cylinder temperature monitoring has detected sensor wire as broken
Active LS mismatch
5105
Active power loadsharing mismatch.
The percentage load value of this device is different to the others.
Reactive LS mismatch
5111
Reactive power loadsharing mismatch
1184
easYgen-3000XT Series
B37574
9 Appendix
9.5.5.6 Engine monitoring
Released