Woodward easYgen-3000XT Series, Manual, Page: 637 / 1205

ID Parameter CL Setting range
[Default]
Description
Notes
For details please refer to
the manual of your J1939
ECU manufacturer.
This parameter is only
visible if "Device type"
(parameter
╚═▷ 15102 ) is
configured to "ADEC ECU8
MTU" and "ECU remote
controlled" (parameter
╚═▷
15127 ) is configured to
"On".
15164 ECU seq. B_IN_1 2 Determined by
LogicsManager 86.31
[(0 & 1) & 1]
= 11647
This LogicsManager is
prepared to pass binary
information to the ECU.
Right now it is only used
for:
ADEC ECU 9 "Rapid
Engine Start" (SPN 3542)
If the easYgen is
transmitting a start
command and the result of
“86.31 LM: ECU seq.
B_IN_1”is:
False, the ECU9 will start
with "Normal Engine Start"
True, the ECU9 will start
with "Rapid Engine Start"
EMS2 Volvo “Override”
(Engine restored operation)
If the result of "86.31 LM:
ECU seq. B_IN_1" is:
False: The Volvo override
flag is only active if LM
“04.27 Critical mode”
True: The Volvo override
flag is active independent
of LM “04.27 Critical mode”
S8 Scania “Desorption
Granted Status” (of ADC
Aftertreatment Desorption
Control)
637 easYgen-3000XT Series B37574
4 Configuration
4.7.4.2.2 J1939 Interface
Released