Woodward easYgen-3000XT Series, Manual, Page: 1129 / 1205

Name Function ID
External DO 31 If this logical output becomes true, the external relay output 31
will be activated 11404
External DO 32 If this logical output becomes true, the external relay output 32
will be activated 11405
Relay Application mode (parameter ╚═▷ 3444 )
No. Term.
None A01 GCB open A02 GCB A03 GCB/MCB A04
Internal relay outputs, board #1
[R 01] 41/42 'Ready for operation'; additionally programmable with LogicsManager
CAUTION! Only relay [R 01] has an inverse logic. The relay opens (all other
relays close), if the logical output of the LogicsManager becomes TRUE.
[R 02] 43/46 LogicsManager; pre-assigned with 'Centralized alarm (horn)'
[R 03] 44/46 LogicsManager; pre-assigned with 'Starter'
[R 04] 45/46 LogicsManager; pre-assigned with 'Diesel: Fuel solenoid, Gas: Gas valve'
[R 05] 47/48 LogicsManager; pre-assigned with 'Diesel: Preglow, Gas: Ignition'
[R 06] 49/50 LogicsManager Command: close GCB
[R 07] 51/52 LogicsManager Command: open GCB
[R 08] 53/54 LogicsManager Command: close
MCB
[R 09] 55/56 LogicsManager Command: open
MCB
[R 10] 57/60 LogicsManager; pre-assigned with 'Auxiliary services'
[R 11] 58/60 LogicsManager; pre-assigned with 'Alarm class A, B active'
[R 12] 59/60 LogicsManager; pre-assigned with 'Alarm class C, D, E, F active'
9.3.5 Factory Settings
LogicsManager's default definition
ID Name Function
4871 Inhibit cranking (02.01 LM FALSE02.01 LM FALSE And True) And True
5580 PID1 ctrl.release (False And True) And True
5593 PID2 ctrl.release (False And True) And True
5679 PID3 ctrl.release (False And True) And True
7794 Enable 2nd display brightness (Not 04.64 Key activation And True) And True
7799 Enable front foil heater (True And True) And True
7801 System update (False And True) And True
7857 RP Full mode (02.01 LM FALSE And True) And True
7858 RP Annunciator (02.01 LM FALSE And True) And True
7859 RP Off mode (02.01 LM FALSE And True) And True
1129 easYgen-3000XT Series B37574
9 Appendix
9.3.5 Factory Settings
Released