Prioritized function
Overrides
Reaction
will be enabled then, a pause time may be configured for
the emergency power operation.
Inhibit emerg.run
Emergency
No start will be performed.
Emergency during Start w/o
load
The generator keeps on running without taking over load.
Relay outputs
All relays may be controlled directly by the LogicsManager depending on the respective
application mode.
Name LM:
Function
ID
99.01 LM: Ready for
op. OFF
(Ready for operation
OFF)
If this logical output becomes true, the relay output 1 will be
deactivated
11870
99.02 LM: Relay 2
If this logical output becomes true, the relay output 2 will be
activated
11871
99.03 LM: Relay 3
If this logical output becomes true, the relay output 3 will be
activated
11872
99.04 LM: Relay 4
If this logical output becomes true, the relay output 4 will be
activated
11873
99.05 LM: Relay 5
If this logical output becomes true, the relay output 5 will be
activated
11874
99.06 LM: Relay 6
If this logical output becomes true, the relay output 6 will be
activated
11875
99.07 LM: Relay 7
If this logical output becomes true, the relay output 7 will be
activated
11876
99.08 LM: Relay 8
If this logical output becomes true, the relay output 8 will be
activated
11877
99.09 LM: Relay 9
If this logical output becomes true, the relay output 9 will be
activated
11878
99.10 LM: Relay 10
If this logical output becomes true, the relay output 10 will be
activated
11879
99.11 LM: Relay 11
If this logical output becomes true, the relay output 11 will be
activated
11880
99.12 LM: Relay 12
If this logical output becomes true, the relay output 12 will be
activated
11881
Name
Function
ID
99.13 LM: Relay 13
If this logical output becomes true, the relay output 2 will be
activated
11882
1126
easYgen-3000XT Series
B37574
9 Appendix
9.3.4 Logical Outputs
Released