Woodward easYgen-3000XT Series, Manual, Page: 497 / 1205

ID Parameter CL Setting range
[Default]
Description
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
Monitoring Parameter Alignment VDE AR-–4105
The following parameters are compared for monitoring its alignment:
Control Parameter ID Parameter
Mains Decoupling 3110 Mains Decoupling
Overfrequency level 2 2856 Monitoring
2860 Limit
2861 Delay
Underfrequency level 2 2906 Monitoring
2910 Limit
2911 Delay
Overvoltage level 2 2956 Monitoring
2960 Limit
2961 Delay
Undervoltage level 2 3006 Monitoring
3010 Limit
3011 Delay
Mains voltage increase 8806 Monitoring
8808 Mains decoupling volt.incr.
8807 Limit
Change of frequency 3058 Change of frequency
3054 Phase shift: Limit 1-phase
3055 Phase shift: Limit 3-phase
3104 Limit (df/dt)
3105 Delay (df/dt)
Disable mains monitoring 15159 Set TRUE
Table 66: VDE 4105 alignment: Supervised parameters
ID Parameter CL Setting range
[Default]
Description
5131 Alarm class 2 Class A, Class B, Class C, Class D,
Class E, Class F , Control
[Class C]
The alarm class specifies what
action should be taken if the
parameter alignment between the
communication devices(s) of the
AR-–4105 system is active.
497 easYgen-3000XT Series B37574
4 Configuration
4.5.3.4.1 Setup Grid Code AR-–4105
Released