Woodward easYgen-3000XT Series, Manual, Page: 483 / 1205

ID Parameter CL Setting range
[Default]
Description
[Class B] For additional information refer
to.
╚═▷ “9.5.4 Alarm Classes” .
8885 Delay 2 0000 ... 9999 s Time between exceeding the limit
and alarm triggering.
[60 s]
8887 Self acknowledge 2 Yes The control unit automatically
clears the alarm if the fault
condition is no longer detected.
[No] The control unit does not
automatically reset the alarm
when the fault condition is no
longer detected.
The alarm must be acknowledged
and reset by manually pressing
the appropriate buttons or by
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
Wirebreak Cylinder Temperature
ID Parameter CL Setting range
[Default]
Description
8890 Delay 2 0000 ... 9999 s Time between *** exceeds limits
and *** is activated.
[2 s]
8888 Alarm class 2 Class A, Class B, Class C, Class D,
Class E, Class F , Control Each limit may be assigned to an
independent alarm class that
specifies what action should be
taken when the limit is surpassed.
[Class B] For additional information refer
to.
╚═▷ “9.5.4 Alarm Classes” .
8889 Self acknowledge 2 Yes The control unit automatically
clears the alarm if the fault
condition is no longer detected.
[No] The control unit does not
automatically reset the alarm
when the fault condition is no
longer detected.
The alarm must be acknowledged
and reset by manually pressing
the appropriate buttons or by
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
483 easYgen-3000XT Series B37574
4 Configuration
4.5.2.8 Cylinder Temperature
Released