• The square is dotted, if the according cylinder is not configured
•
• The square contains an arrow-up, if the limit is exceeded
•
• The square contains an arrow-down, if limit is below target
•
• The square contains a '!' exclamation point sign, if the sensor is missing (wire break)
•
or error was detected
• If an alarm occurs and the monitor is still active, the new alarm is linked by logic 'OR'
•
to the others
• The monitor ignores values of cylinders with wire break or sensor defect
•
• The alarm trip displaying is removed, if the alarm of the according level was
•
successful acknowledged
• The wire break trip has a higher priority as the limit monitoring. That means: with
•
up-coming wire break only the according trip bits are RESET. Other cylinders not
touched.
General monitoring
ID
Parameter
CL
Setting range
[Default]
Description
15158
Release cyl.temp.
2
Determined by LogicsManager
87.71
[(0 & 1) & 1;
t
ON
= 0.00; t
OFF
= 0.00]
= 11460
True: The temperature deviation
monitoring is released.
False: The temperature deviation
monitoring is blocked.
8876
Monitoring at
2
[Off]
The monitoring is deactivated.
The alarm screen is not displayed.
Overrun
The single temperatures are
monitored on maximum deviation
in direction of higher
temperatures.
Underrun
The single temperatures are
monitored on maximum deviation
in direction of lower temperatures.
Both
The single temperatures are
monitored on maximum deviation
in direction of lower and higher
temperatures.
8877
Source cylinder
temperature
2
Ext. AI
The temperatures are taken from
external temperature module
(Phoenix, AI1 - AI16, 16 ports).
[J1939]
The temperatures are taken from
the J1939 protocol. (SPN 1137 -
1156, 20 ports).
Notes
Parameter available only if
external sources for cylinder
temperature are connected.
481
easYgen-3000XT Series
B37574
4 Configuration
4.5.2.8 Cylinder Temperature
Released