Woodward easYgen-3000XT Series, Manual, Page: 258 / 1205

Available "Sender type"s
(parameters 5856, 5869, ...)
0 - 10 V R0=100
±10 V R0=10
0 - 20 mA R0=20
±20 mA R0=30
4 - 20 mA R0=50
0 - 400 Ohms R0=120
0 - 4000 Ohms R0=150
Thermocouple R0=200
R0=240
R0=300
R0=400
R0=500
R0=1000
R0=1500
R0=2000
R0=3000
Available "Sender connection type"s
(parameters 5859, 5872, ...)
Two wire
Three wire
4.4.2.7 External Analog Outputs
If an external expansion board (e.g. from Phoenix Contact or WAGO) is connected to the
easYgen via the CAN bus, it is possible to use 4 additional analog outputs.
The configuration of these external analog outputs is performed similarly to the internal
analog outputs.
Refer to ╚═▷ Table 50 for the parameter IDs of the parameters for external analog
outputs 1 through 4.
Please note that the available options for the Selected hardware type are limited. Refer
to the Parameter List for details.
Parameter Ext. AO 1 Ext. AO 2 Ext. AO 3 Ext. AO 4
Data source ext.
AO {x} 10237 10247 10257 10267
AnalogManager: [Pass Through of "11.03 Speed bias [%]"]
258 easYgen-3000XT Series B37574
4 Configuration
4.4.2.7 External Analog Outputs
Released