Woodward easYgen-3000XT Series, Manual, Page: 259 / 1205

Parameter Ext. AO 1 Ext. AO 2 Ext. AO 3 Ext. AO 4
Source value at
minimum level 10240 10250 10260 10270
Source value at
maximum level 10241 10251 10261 10271
Filter time
constant 10239 10249 10259 10269
Selected hardware
type 10238 10248 10258 10268
Setting range: Off; mA; V
Minimum hardware
level 10242 10252 10262 10272
Maximum
hardware level 10243 10253 10263 10273
Ext. analog output
{x}
(displayed in
ToolKit only: ON/
OFF)
10245 10255 10265 10275
Notes:
Refer to ╚═▷ Chapter 4.4.2.7 for details and definition of the parameters.
Table 50: External analog outputs {1 to 4} - parameter IDs
ID Parameter CL Setting range
[Default]
Description
10237
10247
10257
10267
AM Data source
ext.AO1 2 Determined by AnalogManager
93.21 .. 93.24
AO1 to AO 4: [A1 = "11.03
Speed bias [%]"]
The data source may be selected
from the available data sources.
Notes
Refer to ╚═▷ “9.4.2 Data Sources
AM” for a list of all data sources.
10238
10248
10258
10268
Selected hardware
type 2 This parameter is used to
configure the appropriate type of
analog controller signal. The range
of the analog output is configured
here.
[Off] No analog output signal will be
issued.
mA
V
10242
20252
10262
10272
Minimum hardware
level
(User defined minimum
output value)
2 0.00 to 20.00
[0.00]
The value of the configured
hardware range, which shall
correspond with the configured
minimum source value, must be
entered here (y-axis). This
specifies the minimum limit of the
hardware range.
Example
If the value configured here is 2.5,
the maximum output range of
259 easYgen-3000XT Series B37574
4 Configuration
4.4.2.7 External Analog Outputs
Released