Mazda MX-6 1998, Руководство по ремонту

Страница: 867 / 1282

AUTOMATIC TRANSAXLE [GF4A-EL]
W 6 U 5 1 7 W E Q
9. Remove the control valve body component.
W 6 U 5 1 7 W E R
10. Align the manual plate and the manual valve.
O
MANUAL PLATE
11. Install the control valve body component.
Tightening torque
10.8— 14.7 N m
{110— 150 kgf-cm, 95.5— 130.2 in lb f}
MANUAL VALVE
w 6 U 5 i t w e s
12. Match the harness colors and connect the
solenoid connectors and transaxle fluid
temperature sensor connector.
13. Install a new gasket and the control valve body
cover.
Tightening torque
8.4— 10.7 N m
{85— 110 kgf-cm, 73.7— 95.4 in lbf}
W 6 U 5 1 7 W E U
14. Install the radiator hose. (Refer to 01-12
RADIATOR REMOVAL/INSTALLATION.)
15. Install the oil cooler hose. (Refer to 0 5 -1 7B OIL
COOLER REMOVAL/INSTALLATION [GF4A-EL].)
16. Install the splash shield.
17. Fill the radiator and reservoir with the specified
amount and type of engine coolant. (Refer to
01-12 ENGINE COOLANT LEVEL
INSPECTION.)
18. Connect the negative battery cable.
19. Fill the transaxle with the specified ATF. (Refer to
0 5 -1 7B AUTOMATIC TRANSAXLE FLUID (ATF)
REPLACEMENT [GF4A-EL].)
20. Check for leakage of ATF from the oil pan or the
oil hose connecting points.
21. Carry out the mechanical system test. (Refer to
0 5 -1 7B MECHANICAL SYSTEM TEST
[GF4A-EL].)
22. Carry out the road test. (Refer to 0 5 -1 7B ROAD
TEST [GF4A-EL].)
05—17 B -2 7