Mazda MX-6 1998, Руководство по ремонту

Страница: 942 / 1282

CONTROL SYSTEM
MAGNETIC CLUTCH ADJUSTMENT
1. Remove and set the A/C compressor on a level
block. (Refer to 07-11 A/C COMPRESSOR
REMOVAL/INSTALLATION.)
2. Turn on the magnetic clutch by connecting the
battery positive voltage to the magnetic clutch
connector terminal and the ground to the A/C
compressor body.
3. Fix a dial gauge on a magnetic base and set the
probe onto measuring point A on the pressure
plate surface.
4. Turn off the magnetic clutch by disconnecting the
ground from the A/C compressor body, then
measure the dial gauge readings.
5. Measure the clearance for point B and C on the
pressure plate surface by repeating the above
steps 2 through 4.
0.35— 0.65 mm {0.014— 0.025 in}
W 6 U 7 4 0 W 0 3
W 6 U 7 4 0 W A 4
If not within the specification, remove the pressure
plate and adjust the clearance by changing the
shim size or the number of shims. (Refer to 07-40
MAGNETIC CLUTCH
DISASSEMBLY/ASSEMBLY.)
W 6 U 7 4 0 W A 5
MAGNETIC CLUTCH INSPECTION
1. Disconnect the magnetic clutch connector.
2. Connect battery positive voltage to terminal A of
magnetic clutch and ground to the A/C
compressor body.
W 6 U 7 4 0 W 0 2
3. Verify that the magnetic clutch operates.
4. If not as specified, adjust the magnetic clutch.
(Refer to 07-40 MAGNETIC CLUTCH
ADJUSTMENT.)
5. If the magnetic clutch clearance is okay, replace
the stator.
W 6 U 7 4 0 W A 2
0 7 -4 0 -1 0